PRODUCTS
Copper Transceiver

1.25 Gb/s Copper Transceiver

- Compliant with SFP MSA
- Compliant to IEEE 802.3az

Compact RJ-45 Connector Assembly
- Detailed Product Information in EEPROM
- Access to Physical Layer IC via 2-wire Serial Bus
- Single 3.3 V Power Supply
- RoHS-6 Compliant (lead-free)



1.25Gb/s SFP Compact RJ-45 Connector Assembly
Product Number Bit Rate Reach Package Temperature
Range
Data
Sheet
SPE-7100G Up to 1.25 Gb/s 100 m SFP+ with RJ-45 COPPER CONNECTOR    0 ~ 70°C
SPE-7101G Up to 1.25 Gb/s 100 m SFP+ with RJ-45 COPPER CONNECTOR    0 ~ 70°C
SPE-7100-SG Up to 1.25 Gb/s 100 m SFP+ with RJ-45 COPPER CONNECTOR    0 ~ 70°C
SPE-7101-SG Up to 1.25 Gb/s 100 m SFP+ with RJ-45 COPPER CONNECTOR    0 ~ 70°C
SPE-7100AG Up to 1.25 Gb/s 100 m SFP+ with RJ-45 COPPER CONNECTOR    -40 ~ 85°C
SPE-7101AG Up to 1.25 Gb/s 100 m SFP+ with RJ-45 COPPER CONNECTOR    -40 ~ 85°C
SPE-7100A-SG Up to 1.25 Gb/s 100 m SFP+ with RJ-45 COPPER CONNECTOR    -40 ~ 85°C
SPE-7101A-SG Up to 1.25 Gb/s 100 m SFP+ with RJ-45 COPPER CONNECTOR    -40 ~ 85°C
Notes:

SPE-7100G, SPE-7101G, SPE-7100AG and SPE-7101AG 1000Mbps with a SERDES interface that does not
support SGMII, these modules will operate at 1000BASE-T only.


SPE-7100-SG, SPE-7101-SG, SPE-7100A-SG and SPE-7101A-SG 10/100/1000Mbps operation requires the host
system to have an SGMII interface without clocks and auto-negotiation advertise all capabilities 10/100/1000Mbps.